Omron F3SG-PG Series, User Manual, Page: 268 / 473

238
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
*1. This parameter can be changed using SD Manager 3. For details, refer to 4-3-5-2. Stable Light Threshold Adjustment .
*2. The function can be configured even when no secondary sensor (Channel 2 or Channel 3) is connected. In that case, the
safety outputs of the secondary sensor (Channel 2 or Channel 3) are regarded as the OFF state.
*3. This is not supported by F3SG-PG.
4-3-3-2. Designated Beam Output
First, carry out 4-3-1. Preparing to Change Settings .
Next, click the icon below on the Top page.
The setting screen below is displayed.
Select [Designated beam output information] for the output operation mode of the auxiliary output.
In the following example, the designated beam output information is assigned to the output operation
mode of the auxiliary output.
When [Designated beam output information] is selected for Auxiliary Output at the same time, the area configured is the
same for all these outputs.
None (OFF) Disables the function.
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C

F3SG-SRB

F3SG-PGA-L

Information Name Description