Omron F3SG-PG Series, User Manual, Page: 258 / 473

228
Chapter
4
Ba
si
c O
p
era
tio
n
of
SD
M
a
n
a
ge
r 3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
For operator and administrator levels, refer to 4-2-5. Logging In/Logging Out .
For the method to reflect the configuration data saved in the Intelligent Tap onto the sensor, refer to 3-6-3. Performing
Restoration .
For reading of the configuration data saved in the Intelligent Tap, refer to 4-2-7-1. Reading Configuration from Intelligent
Tap .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.

Writing Configuration File Saved in PC into Intelligent Tap
Check that the Intelligent Tap is correctly connected and log in with the administrator level.
By selecting the [Open] button from the [Main] menu on the tool bar or clicking the [Open]
button directly from the tool menu, and select the configuration file (with extension sdm3) saved in
an arbitrary location.
Click the [Write] button to write the configuration.

F3SG-SR/PG Not Connected:
Configuration data can be written to the Intelligent Tap.
To write the configuration data written to the Intelligent Tap to the F3SG-SR/PG, refer to 3-6-3.
Performing Restoration to perform restoration.

F3SG-SR/PG Connected:
Configuration data can be written to the Intelligent Tap and F3SG-SR/PG.
For operator and administrator levels, refer to 4-2-5-1. Logging In .
For the target sensor in the cascaded configuration of the F3SG-SR, refer to
4-2-3-2. Description on Top Page and Each
Button .
For reading of the configuration file saved in the PC, refer to 4-2-4-2. Reading Configuration from PC .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.