Omron F3SG-PG Series, User Manual, Page: 165 / 473

135
F3SG-SR/PG
User’s Manual
Chapter
2
Des
ig
nat
ed Beam Ou
tpu
t
System Operation and Functions
E
2-23-4. Setting with SD Manager 3
The user can make changes to the settings of this function by the SD Manager 3.
The designated beam setting can be changed using SD Manager 3. The number of areas available for
setting of designated beam area is 1. When outputting the light unblocked/blocked states of a
designated beam, configure any one of the output operation modes of auxiliary output or Area Beam
Indicator (ABI) as designated beam output information.
It is recommended that the Position 2 of the DIP Switch be set at OFF (DIP Switch Disabled).
Refer to 4-3-3-2. Designated Beam Output for more information on setting this function by the SD Manager 3.
Function Initial value Configurable value or numerical range
Designated beam output Disable Enable/Disable
Setting by Manual Manual/Teach-in
Designated beam zone Bottom beam - Any beam in 1-beam increments
Top beam -
Designated beam state Light-ON Light-ON/Dark-ON