Omron F3SG-PG Series, User Manual, Page: 290 / 473

260
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
4-3-5-3. Operating Range Selection
First, carry out 4-3-1. Preparing to Change Settings .
Next, on the Top page, click the icon below.
The setting screen below is displayed.
For more information on operating range selection, refer to 2-20. Operating Range Selection .
If the emitter is not connected to the Intelligent Tap, you can configure the Operating Range Selection using SD Manager
3.
Under the optical synchronization setting, the operating range is determined by the wiring of the operating range
selection input line.
When changing the settings is complete, confirm the settings and write the configuration to the F3SG-SR/PG.
To enable the written configuration, refer to
4-2-7-3. Writing Configuration into Intelligent Tap .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.
F3SG-SRA

F3SG-PGA-A F3SG-PGA-C
F3SG-SRB

F3SG-PGA-L

No. Function name Description Initial value
Configurable value or numerical
range
1 Operating Range
Selection Select the operating range. Long mode Short mode/Long mode