Omron F3SG-PG Series, User Manual, Page: 265 / 473

235
F3SG-SR/PG
User’s Manual
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
Setting with SD Manager 3
E
4-3-2-4. External Test Input
First, carry out 4-3-1. Preparing to Change Settings .
Next, on the Top page, click the icon below.
The setting screen below is displayed.
By setting either enable or disable of the external test signal inversion to PNP/NPN selection, the
condition to stop emission can be selected. Refer to the table below.
*1. This can be set using SD Manager 3.
*2. This can be set by wiring.
For more information on external test signal inversion, refer to 2-6. External Test .
When changing the settings is complete, confirm the settings and write the configuration to the F3SG-SR/PG.
To enable the written configuration, refer to
4-2-7-3. Writing Configuration into Intelligent Tap .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C
F3SG-SRB

F3SG-PGA-L

No. Function name Description
Initial
value Configurable value
or numerical range
1 External Test Signal
Inversion Set either enable or disable of the external test signal
inversion. Disable Enable/Disable
External Test Signal Inversion *1
Input voltage
PNP setting *2 NPN setting *2
Disable (factory default setting)
Emission stops by connecting with 24 V
connection.
Emission stops by connecting with 0 V
connection.
Enable
Emission stops by connecting with 0 V
connection.
Emission stops by connecting with 24 V
connection.