Omron F3SG-PG Series, User Manual, Page: 199 / 473

169
F3SG-SR/PG
User’s Manual
Ch
apt
e
r
3
Tea
c
h-
in
(F
ix Bla
n
king / Flo
a
ting
Blank
in
g
)
Setting with Intelligent Tap
E
*1 The Fixed Blanking zone is configured to include one additional beam outside the actually blocked
beams. Two beams on both ends are configured as allowable beams.
*2 If the setting value is not an allowable one, the setting is invalid. The following cases are judged as
invalid.
•All beams have been configured as a Fixed Blanking zone (including allowable beams).(Fig. 1)
•All beams except the beams at both ends have been configured as a Fixed Blanking zone. (Fig. 2)
•End beams (synchronization beams) have been configured as a Fixed Blanking zone at the same
time. (Primary sensor in Optical Synchronization only) (Fig. 3)
•If beams are not blocked before transition to the Teaching Mode.
•If the gap between blocking objects is not 3 beams or wider on teaching of multiple fixed blanking
areas.(Fig. 4)
•Four or more areas have been configured as Fixed Blanking zones for one channel.
Indicator status of the F3SG-SR receiver when Teach-in setting is valid or invalid
*1 If F3SG-SRA is used with the wired synchronization setting, the ABI indicator of the emitter for the area blocked by an object
turns ON red.
Teach-in setting is valid Teach-in setting is invalid
LED Indicator Status LED Indicator Status
SEQ SEQ
CFG CFG
ABI *1
Area blocked by
blocking object is
illuminated in red ABI *1
Area blocked by
blocking object is
illuminated in red
Upper Upper
Lower
11th beam
10th beam
Fixed Blanking zone (4th to 11th beams)
Allowable beam (10th and 11th beams)
5th beam
4th beam
Lower
Allowable beam (4th and 5the beams)
Upper Upper
Lower Lower
Fig. 1
Upper Upper
Lower Lower
Fig. 2
Upper Upper
Lower Lower
Fig. 3
Upper Upper
Lower Lower
Fig. 4
OFF
Blinking
illuminated
Blinking