Omron F3SG-PG Series, User Manual, Page: 261 / 473

231
F3SG-SR/PG
User’s Manual
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
Setting with SD Manager 3
E
4-3. Changing Settings with SD Manager 3
For F3SG-PGA-C, the number of the beams displayed is a half of that specified on the model.
For more information on the number of the beams specified for each model, refer to
1-6-1-2. F3SG-PG Series .
4-3-1. Preparing to Change Settings
To change settings, log in SD Manager 3 with the administrator level.
If configuring F3SG-SR in a cascade connection, select a target sensor segment to be configured.
For operator and administrator levels, refer to 4-2-5-1. Logging In .
For reading of configuration, refer to 4-2-7-1. Reading Configuration from Intelligent Tap .
To reflect each function setting described later to the Intelligent Tap, refer to 4-2-7-3. Writing Configuration into Intelligent
Tap .
When connecting the Intelligent Tap to a F3SG-SR/PG and trying to return the F3SG-SR/PG to [Detecting], follow step 4
of
4-1-3-2. Connection Procedure When Using USB Connector to restart the F3SG-SR/PG and Intelligent Tap, or click
the [Monitor] button.
No. Function Description
1 Login Shows the login screen.
2 Target sensor Select a sensor to be configured.
The selected target sensor is displayed in yellow.