Omron F3SG-PG Series, User Manual, Page: 463 / 473

433
F3SG-SR/PG
User’s Manual
Chapter
8
Opt
io
nal
Ac
ce
ssor
ie
s (Sol
d Sep
ara
tel
y)
Appendix
E
Test Rod
Spatter Protection Cover (Two cables per set, one for emitter and one for receiver)
Lamp
Floor Mounting Column
* When using the floor-standing stand, the intermediate fitting of F3SG-SR/PG is not required.
Appearance Model Diameter
F39-TRD14
F39-TRD25
F39-TRD30 14 mm dia.
25 mm dia.
30 mm dia.
To check operation before use, purchase and use the test rod.
Appearance Model Remarks
F39-HSG

Two pieces per set, common for emitter/receiver.
For the F3SG-R of the protective height of 2,000 mm or longer,
use two Spatter Protection Covers of different lengths.
Please note the following:
• The operating range of the F3SG-SR attached with the Spatter
Protection Cover is 10% shorter than the rating.
Material: PC resin (Transparent cover), ABS resin (Side wall)
Appearance Model Remarks
F39-SGLP
Attached to the emitter, receiver, or emitter/receiver and shows the
operating state of F3SG-SR/PG by the indicator state.
Appearance Model Column Height Remarks
F39-ST0990 990mm
Sensors with a product length of
880 mm or less can be mounted.
F39-ST1310 1,310mm
Sensors with a product length of
1,220 mm or less can be
mounted.
F39-ST1630 1,630mm
Sensors with a product length of
1,520 mm or less can be
mounted.
F39-ST1950 1,950mm Sensors with a product length of
1,840 mm or less can be
mounted.
F39-ST2270 2,270mm
Sensors with a product length of
2,080 mm or less can be
mounted.