Omron F3SG-PG Series, User Manual, Page: 137 / 473

107
F3SG-SR/PG
User’s Manual
Chapter
2
O
ver
rid
e
System Operation and Functions
E

Timing chart
2-14-4. Setting with Intelligent Tap
The user cannot make any changes to this function by the DIP Switch.
2-14-5. Setting with SD Manager 3
The user can make changes to the settings of this function by the SD Manager 3.
It is recommended that the Position 2 of the DIP Switch be set at OFF (DIP Switch Disabled).
Setting the override time limit to infinite may cause a failure of disabling the OVERRIDE state when there is a failure of
the override input signal. Conduct risk assessment analysis thoroughly before enabling this setting.
Refer to 4-3-4-3. Muting/Override for more information on setting this function by the SD Manager 3.
Function Initial value Configurable value or numerical range
Override Enable Enable/Disable
Override input time limit 1 s 0.2 to 5 s in 0.1-s increments
Override time limit 600 s 1 to 600 s in 1-s increments, or infinite
RESET
O N
OFF
O V ERRIDE state
Beam state
Un b locked
Blocked
Ena b led
Disa b led
OSSD
N ote. In this timing chart, the O V ERRIDE state ends w hen the F3SG-SR/PG recei v es light.
T1: O v erride inp u t time limit
T2: O v erride time limit
O N
OFF
T1 T1 T1 T1 T1 T1
O N
OFF
Po w er
3 to 6 s
1 s max.
1 s max.
T2 max.