Omron F3SG-PG Series, User Manual, Page: 298 / 473

268
Chapter
4
M
onitor
in
g
with
SD M
a
nag
e
r
3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3

Data Description
For the time data obtained, refer to the timing charts below.
 Standard/ Position Detection Muting

Exit Only Muting
M1 (input time difference) is the data to be analyzed for Muting Statistics Information.
All M1 to M5 data and internal data will be saved in a .cvs file when saving the analysis data.

How to use muting statistics information
1.
Carry out test runs including the muting in an actual installation environment.
Performing the muting allows the F3SG-SR/PG to log muting information.
If the F3SG-SR/PG used is secondhand, there may be logs of previous settings left in the F3SG-SR/PG.
If you do not need such logs, delete them by the [Clear log] button before enabling the muting.
Once the muting statistics log is cleared, log information in the sensor cannot be restored. Save logs in advance, if
necessary.
Logs can be saved as a .csv file by selecting [Retrieve log] and [Save analysis data].
It is necessary to perform the muting at least five times in order to obtain assumed data.
2.
Connect SD Manager 3 to the F3SG-SR/PG and display the muting statistics information screen
above.
3.
Clicking the [Retrieve log] button to obtain logs saved in the F3SG-SR/PG during the test runs in Step
1. Obtained data (table, chart and analysis data) is displayed in the screen.
10 Analysis data Displays measured data of muting input time difference (to be analyzed).
11 Chart Displays a setting parameters and assumed data of the chart (No. 7) and analyzed data
(No. 10) in graph form.
No. Function Description
M1 M2 M5 M3 M4
MUTE A
MUTE B
Muting state
ON
OFF
ON
OFF
ON
OFF
Beam state
Unblocked
Blocked
MUTE A
MUTE B
Muting state
ON
OFF
ON
OFF
ON
OFF
Beam state
Unblocked
Blocked
M1 M2 M5 M3
M4