background image

 

SENSIT s.r.o.

 

Školní 2610, 756 61 Rožnov pod Radhoštěm, ID No. 64087484, VAT No. CZ64087484, Phone: +420 571 625 571, Fax: +420 571

 625 572

 

Company is incorporated in the Companies Register at the Regional Court in Ostrava, Section C, File 13728,  

[email protected]

, www.sensit.cz

 

 

2992

.

10

.

20 

Supersede

 

2991

.1

 

INSTRUCTION MANUAL

 

TEMPERATURE SENSOR DS 150B 

DS 18B20 / 2 x DQ 

Temperature sensor with cable for contact temperature measurements 

on the surface of the pipes and tubes in the range of 

-

40 to 

105 

° C

 

 

Summary of Contents for DS 150B

Page 1: ...rporated in the Companies Register at the Regional Court in Ostrava Section C File 13728 sensit sensit cz www sensit cz 2992 2 10 20 Supersede 2991 1 INSTRUCTION MANUAL TEMPERATURE SENSOR DS 150B DS 18B20 2 x DQ Temperature sensor with cable for contact temperature measurements on the surface of the pipes and tubes in the range of 40 to 105 C ...

Page 2: ...line on a surface The minimum pipe diameter is 20 mm Operating position is arbitrary sensor dimensions enables its location under the insulation on pipes Warnings and restrictions The sensors must not be used for measuring in locations Where the specified technical parameters and operating conditions are not adhered Where the sensor is exposed to mechanical action With explosion hazard For measuri...

Page 3: ...4 After installation and connection to the consequential electrical measuring device the sensor is ready for operation The sensor does not require any special manipulation or maintenance Wiring diagram Technical parameters Type of element Dallas DS18B20 Accuracy class of element 0 5 C in range 10 to 80 C Temperature element wiring Three wire 2x signal DQ Measuring range 40 C to 105 C Power supply ...

Page 4: ...g and or that has been used for a purpose other than specified That has been used in an improper manner inconsistent with the user manual and or generally applicable technical standards or safety regulations That is worn or damaged as a result of normal use of the product without loss of its operational characteristics and guaranteed technical parameters Into which unskilled intervention unauthori...

Reviews: