background image

Shock Absorber for YAMAHA Mslaz

YA 559

Mounting Instructions

Note!

Please note that this image is a general representation 

of the product and may differ slightly from your product.

Note!

Please note that during storage and transportation, 

especially at high ambient temperature, some of the oil 

and grease used for assembling may leak and stain the 

packaging. This is in no way detrimental to the product, 

wipe off the excessive oil/grease with a cloth.

Note!

Before installing this product, check the contents of the 

kit. If anything is missing, please contact an Öhlins dealer.

Warning!

Before installing this product, read the Öhlins Owner’s 

Manual. The shock absorber is an important part of your 

vehicle and will affect the stability.

Kit Contents
Description

Part No

Pcs

Shock absorber

YA 559

1

Bracket, reservoir

60006-12

1

Clamp bracket

03102-15

1

Screw M6x12

01046-36

2

Screw M6x14

00382-16

1

Screw M8x20

00432-02

2

C-spanner

60710-01

2

Sticker Öhlins

01185-01

2

Sticker Öhlins

01185-04

2

Sticker Öhlins

00192-01

2

Owner's Manual

07241-02

1

Note!

Before installing this product, check the contents of 

the kit. If anything is missing, please check an Öhlins 

dealer.

Summary of Contents for YA 559









Reviews: