Mitsubishi Electric MR-JE-C, Instruction Manual

Page: 65 / 312

4. PARAMETERS
4 - 28
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
General
purpose
Communication
CP PS CP PS
PD06
*DI1M
Input device
selection 1M Any input device can be assigned to the CN3-2 pin.
_ _ x x Not used with the positioning mode. 02h
x x _ _ Positioning mode - Device selection
Refer to table 4.2 for setting value.
02h
Table 4.2 Selectable input devices
Setting
value
Input device (Note)
CP PS
_ _ 0 2 SON SON
_ _ 0 3 RES RES
_ _ 0 4 PC PC
_ _ 0 5 TL TL
_ _ 0 6 CR CR
_ _ 0 7 ST1 ST1
_ _ 0 8 ST2 MD1
_ _ 0 9 TL1 TL1
_ _ 0 A LSP LSP
_ _ 0 B LSN LSN
_ _ 0 D CDP CDP
_ _ 1 2 TPR1
_ _ 2 0 MD0 MD0
_ _ 2 4 TP0
_ _ 2 5 TP1
_ _ 2 6 OVR
_ _ 2 7 TSTP
_ _ 2 B DOG SIG
_ _ 3 1 RT
_ _ 3 2 RTCDP
_ _ 3 4 OV0
_ _ 3 5 OV1
_ _ 3 6 OV2
_ _ 3 7 OV3
_ _ 3 8 DI0 DI0
_ _ 3 9 DI1 DI1
_ _ 3 A DI2 DI2
_ _ 3 B DI3 DI3
_ _ 3 C DI4 DI4
_ _ 3 D DI5 DI5
_ _ 3 E DI6 DI6
_ _ 3 F DI7 DI7
Note. The diagonal lines indicate manufacturer settings. Never change the setting.
PD09
*DI2M
Input device
selection 2M Optional input device can be assigned to the CN3-3 pin.
_ _ x x Not used with the positioning mode. 00h
x x _ _ Positioning mode - Device selection
Refer to table 4.2 in [Pr. PD06] for setting value.
07h
PD12
*DI3M
Input device
selection 3M Optional input device can be assigned to the CN3-4 pin.
_ _ x x Not used with the positioning mode. 00h
x x _ _ Positioning mode - Device selection
Refer to table 4.2 in [Pr. PD06] for setting value.
08h