Mitsubishi Electric MR-JE-C, Instruction Manual

Page: 278 / 312

12. WHEN USING WITH A GENERAL-PURPOSE INTERFACE
12 - 63
3) Varying-speed operation
By setting the auxiliary function of the point table, the servo motor speed during positioning can
be changed. Point tables are prepared as many as the number of the set speeds. Refer to
section 7.4 (1) (c) for details. When referring, replace the wording as follows.
Before replacing After replacing
Target point table Point table No. to select
Controlword bit 4 (New set-point) ST1 (Forward rotation start)
Point actual value PT0 (Point table No. output 1) to PT7 (Point table No.
output 8)
4) Automatic repeat positioning operation
By setting the auxiliary function of the point table, the operation pattern of the set point table No.
can be returned to, and the positioning operation can be performed repeatedly. Refer to section
7.4 (1) (d) for details. When referring, replace the wording as follows.
Before replacing After replacing
Target point table Point table No. to select
Controlword bit 4 (New set-point) ST1 (Forward rotation start)
Point actual value PT0 (Point table No. output 1) to PT7 (Point table No.
output 8)