Mitsubishi Electric MR-JE-C, Instruction Manual

Page: 204 / 312

10. OPTIONS AND PERIPHERAL EQUIPMENT
10 - 1
10. OPTIONS AND PERIPHERAL EQUIPMENT
WARNING
Before connecting options and peripheral equipment, turn off the power and wait
for 15 minutes or more until the charge lamp turns off. Otherwise, an electric
shock may occur. In addition, when confirming whether the charge lamp is off or
not, always confirm it from the front of the servo amplifier.
CAUTION
Use the specified peripheral equipment and options to prevent a malfunction or a
fire.
The items shown in the following table are the same with the contents of "MR-JE-_C Servo Amplifier
Instruction Manual". For details, refer to each section indicated in the detailed explanation field. "MR-JE-_C"
means "MR-JE-_C Servo Amplifier Instruction Manual".
Item Detailed explanation
Cable/connector sets MR-JE-_C section 11.1
Regenerative option MR-JE-_C section 11.2
Junction terminal block MR-TB26A MR-JE-_C section 11.3
MR Configurator2 MR-JE-_C section 11.4
Battery MR-JE-_C section 11.5
Selection example of wires MR-JE-_C section 11.6
Molded-case circuit breakers, fuses, magnetic contactors MR-JE-_C section 11.7
Power factor improving AC reactor MR-JE-_C section 11.8
Relay (recommended) MR-JE-_C section 11.9
Noise reduction techniques MR-JE-_C section 11.10
Earth-leakage current breaker MR-JE-_C section 11.11
EMC filter (recommended) MR-JE-_C section 11.12