Mitsubishi Electric MR-J4W2, Instruction Manual

Page: 276 / 542

11. OPTIONS AND AUXILIARY EQUIPMENT
11 - 47
11.12 Junction terminal block MR-TB26A
(1) Usage
Always use the junction terminal block (MR-TB26A) with the option cable (MR-TBNATBL_M) as a set.
To use a junction terminal block, mount it to the DIN rail.
Cable length
05: 0.5 m
1: 1 m
Terminal numbers on a junction terminal block correspond with the pin numbers on the CN3 connector
of a servo amplifier. The terminal symbol S is for the shield.
Junction terminal block
MR-TB26A
Junction terminal block cable
(MR-TBNATBL_M)
CN3
Servo amplifier
Ground the junction terminal block cable using the S terminal of the junction terminal block.
(2) Specifications
Junction terminal block
Item
MR-TB26A
Rating 32 V AC/DC 0.5 A
Stranded wire 0.08 mm
2
to 1.5mm
2
(AWG28 to 14)
Usable cables Solid wire φ 0.32 mm to 1.2 mm
Wire insulator OD φ 3.4 mm or less
Tool
210-619 (WAGO) or equivalent
210-119SB (WAGO) or equivalent
Stripped length 5 mm to 6 mm