Mitsubishi Electric MR-J4W2, Instruction Manual

Page: 267 / 542

11. OPTIONS AND AUXILIARY EQUIPMENT
11 - 38
(c) Cable clamp fitting AERSBAN-_SET
Generally, the grounding of the shielded wire may only be connected to the connector's SD terminal.
However, the effect can be increased by directly connecting the cable to an grounding plate as
shown below.
Install the grounding plate near the servo amplifier for the encoder cable. Peel part of the cable
sheath to expose the external conductor, and press that part against the grounding plate with the
cable clamp. If the cable is thin, clamp several cables in a bunch.
The clamp comes as a set with the grounding plate.
[Unit: mm]
Strip the cable sheath of
the clamped area.
cutter
cable
Cable clamp
(A, B)
Cable
Grounding
plate
External conductor
Clamp section diagram
40
Dimensions
[Unit: mm]
Grounding plate
(Note) M4 screw
11
3
6
C A
6 22
17.5
35
35
7
24
0 -0.
2
B ± 0.3
2-
φ
5 hole
mounting hole
[Unit: mm]
Clamp section diagram
L or less 10
30
24
+ 0.
3
0
Note. Screw hole for grounding. Connect it to the grounding plate of the cabinet.
Model A B C Accessory fittings Clamp fitting L
AERSBAN-DSET
100 86 30 Clamp A: 2 pcs. A 70
AERSBAN-ESET
70 56 Clamp B: 1 pc. B 45