Miranda Kaleido-X User Manual Download Page 81

Page: 81 / 407

Exporting a Database

Exporting a Database

To export a database:

1. On the

Configure

menu, point to

Database

, and then click

Export

The

Export to Multi-Viewer

window appears, prompting you for the IP address of the multi-viewer to

which you wish to transfer the database.

IP addresses for all the multi-viewers that are on the same subnet as your PC are included in the list.

2. If your PC and the multi-viewer are on the same subnet, then you can select the IP address of the multi-

viewer from the list. Otherwise type the appropriate IP address in the box.

3. Click

A window appears, prompting you to confirm that you really want to export data to the multi-viewer.

Multi-viewer type

IP address

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X

Reviews:

Miranda Kaleido-X, User Manual, Page: 81 / 407

Search results

Summary of Contents for Kaleido-X

Reviews: