Miranda Kaleido-X, User Manual, Page: 250 / 407

242
Creating Actions
10
5. From the Action List pane under the Tool tab, click and drag one of the available action items and drop
it in one of the six columns at the bottom of the Actions pane:
6. Configure the action’s properties in the Properties pane.
7. Repeat step 5 and step 6 as necessary.
8. Click the Save button in the application toolbar.
Note: You do not have to perform this step for actions triggered by Gateway commands, because the
Gateway alarm itself acts as the trigger.
Note: If you assign multiple action items to a trigger, you can change the order of execution by dragging
items to higher or lower positions in the list. When the background action is triggered, its associated
action items are executed in order from top to bottom.
Drag an Action Item into the column that
describes the alarm state or transition
that should trigger the action
Define Action
properties here