Miranda Kaleido-X User Manual Download Page 288

Page: 288 / 407

280

Routers & Kaleido-X

Step 1 – Defining a Physical Router

To configure an external router:

1. Launch XEdit and open the database associated with the multi-viewer for which you wish to configure

an external router.

2. Drag

External Router

from the

Equipment

library onto the root of the System hierarchical list in the

Description/Calibrations

pane:

3. Enter a descriptive name to act as a device identifier for the external (physical) router:

A new physical router appears in the System list:

4. Click the

Interconnects

tab, draw a line between the multi-viewer and the External Router icons to

establish a connection (i.e. add a connection properties entry to the database), and then click the line.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X

Reviews:

Miranda Kaleido-X, User Manual, Page: 288 / 407

Search results

Summary of Contents for Kaleido-X

Reviews: