Miranda Kaleido-X, User Manual, Page: 65 / 407

Acknowledging Alarms
57
Acknowledging Alarms
Acknowledging Alarms on the Monitor Wall
When you acknowledge an alarm, latched or current, the latched status is reset to normal (i.e. unlatched).
If the alarm is acknowledged while its status indicates an error condition, the latched status is reset to
normal, and will only go back to error if the alarm status returns to normal and then to error again.
To acknowledge an alarm, by using the RCP2:
• Move the pointer over the monitor whose alarm state you wish to acknowledge, and then press the
UNLATCH STATUS button on the RCP2.
To acknowledge an alarm, by using the mouse:
• Right-click the monitor whose alarm state you wish to acknowledge, and then click Unlatch/
Acknowledge on the shortcut menu:
To acknowledge all current alarms in a room:
• Right-click the monitor wall, point to Monitor Wall (if you clicked a monitor), and then click Unlatch/
Acknowledge all on the shortcut menu:
Unlatch/Acknowledge