Miranda Kaleido-X, User Manual, Page: 125 / 407

GPI/Genlock Calibrations
117
4. In the Properties tab, click the SDI Output Reclocking box, and then select ON or OFF from the list.
5. Click Apply to all to apply the chosen value throughout the system.
GPI/Genlock Calibrations
Calibrating GPI Lines
You can define actions that change the state of a GPI output line, and assign them to a monitor. GPI lines
configured as outputs can have their ON/OFF state set manually in XEdit, for test purposes.
To configure a GPI line’s direction as an output:
1. In the main window, click the System tab, and then click Description/Calibrations on the
second-level tab bar.
A hierarchical list representing the current system appears.
2. In the list, expand the multi-viewer you wish to calibrate.
3. Expand the GPI/GENLOCK module, and then click the appropriate GPI line element.
4. In the Properties tab, click the GPI Direction box, and then select output from the list.
5. Click Apply to all , if every GPI line in your system is to be configured as an output.
Note: GPI direction is pre-defined on the Kaleido-X16 and KMV-3901/3911 multi-viewers.