manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 53 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 53

Displaying Subtitles and Closed Caption Text

45

Switching Closed Captioning On/Off

To switch CC (608) closed captioning on/off:

1. Right-click the appropriate video source on the monitor wall.

2. On the shortcut menu, point to 

CC (608)

, and then click either 

CC1

 or 

Off

:

To switch CC (708) closed captioning on/off:

1. Right-click the appropriate video source on the monitor wall.

2. On the shortcut menu, point to 

CC (708)

, and then click either the appropriate service number or 

Off

:

Other / Unknown

Auto

 

Text (CC/
Subtitling)

Enable text

 check box, 

Text 

mode

 sub-menu.

Note: 

The KMV-3901/3911 multi-viewers do not support extraction of closed captions.

Signal type

Text Mode

Icon

Label

Available choices

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments