manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 155 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 155

Managing Rooms

147

4. Type a name for the new room, and then click 

Save

.

Opening a Room

To open an existing room:

1. Click the 

Rooms

 tab in the main window.

2. On the 

File

 menu, click 

Open

.

The 

Open Room

 window appears:

Notes

• A room name cannot exceed 7 characters.
• In a cluster system, each room must have a unique name across the whole system. XEdit will not 

let you use a name if there is already a room with this name associated with one of the multi-
viewers within the cluster.

• In a cluster system, if one of the member multi-viewers becomes unavailable while you were 

configuring a room, then XEdit will not let you save the room. If you wish to save the room 
anyway, first remove any unavailable multi-viewer from the cluster.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments