manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 20 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 20

12

Getting Started

2

Kaleido-X (7RU) system overview

Kaleido-X (7RU) x 2 Expansion

Since version 3.00 of Miranda’s Kaleido-X Software, it is possible to expand the input connectivity of one 
Kaleido-X (7RU) frame to include that of a second. The two frames, each with its own expansion (KXO-EXP) 
card, are connected by a high bandwidth cable, such that all the output (KXO) modules on each frame (up 
to 6 in total) have access to all inputs (KXI) on each frame (up to 192 in total) without any blocking or 
bandwidth limitations.

Using XEdit, the two frames can be configured as a single system, allowing 

rooms

 to share input modules 

from either frame. The expansion card allows seamless sharing of video, audio monitoring output, time 

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments