manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 290 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 290

282

Routers & Kaleido-X

12

7. Select the appropriate protocol in the 

Router protocol

 list:

Once you have chosen a protocol, you can click 

Help

 to view tips on its use.

– In the case of a serial connection, you can specify serial communication parameters: the bit rate 

(bps), the number of data bits, parity, stop bits and flow control:

Note: 

 A physical router associated with the multi-viewer’s own internal router module is also 

predefined. In the case of a Kaleido-X (7RU) multi-viewer that does not have any router card, there will 
be no entries in the 

Levels

 list for this physical router).

Note: 

The connection type and multi-viewer output specified earlier (in the 

Properties

 tab) appear here 

automatically. These values can be changed, if necessary. Any changes will also appear under the 

Properties

 tab.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments