manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 50 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 50

42

Operation of the Monitor Wall

3

The video is resized accordingly within the layout.

Video Cropping/Zooming

To toggle the cropping mode using the RCP2:

•

To change the current cropping mode, move the mouse pointer over the video signal you wish to 
change, and then press the UNDERSCAN button on the RCP2. Continue pressing UNDERSCAN to toggle 
between underscan and overscan mode.

To toggle the cropping mode using the mouse:

•

Right-click the video source.

If the video is in underscan mode, then the shortcut menu will allow you to change to overscan:

If the video is in overscan mode, then the shortcut menu will allow you to change to underscan:

Note: 

There may be one more choice on the menu if you set a custom aspect ratio in XEdit, for this 

monitor. See “Setting a Video Monitor’s Aspect Ratio” on page 187.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments