Miranda Kaleido-X, User Manual, Page: 364 / 407

356
Administration and Servicing
16
From Multi-Viewer to/from RCP2
The following ports, used for communications to/from RCP2 control panels, are open by default on all
Kaleido-X systems:
From Multi-Viewer to Peripheral Devices
From Peripheral Devices to Multi-Viewer
The following ports must be open on peripheral devices (e.g. router controllers):
Router drivers also use default ports:
Service Port Transport Notes
RCP2 5120 TCP Used to listen for Kaleido-X discovery packets
10000 TCP RCP2 protocol
10001 TCP RCP2 protocol
5120 UDP On multicast 230.8.8.9 for RCP2
5121 UDP For RCP2
Service Port Transport Notes
SMTP 25 TCP Simple Mail Transfer Protocol, for e-mail alerts.
Port Transport Notes
2000 TCP Used to control the Kaleido-X internal router via the Snell (Pro-Bel) SW-P-02
protocol
4381 TCP Used to control the Kaleido-X internal router via the Nevion (Network) protocol
5194 TCP Used to control the Kaleido-X internal router via the NVISION Ethernet protocol
- Compact router protocol.
14000 TCP Used to control the Kaleido-X internal router via the Snell (Pro-Bel) SW-P-08
protocol
Driver Port Transport Notes
ETL 4000 TCP
GVG 7000 Native 12345 TCP