manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 168 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 168

160

Setting Up Rooms

8

Frequency and timing information, as listed in XAdmin

4. Type a name for the new resolution in the 

Friendly name

 box, and then click 

Save as 

to close the 

Edit 

Resolution Settings

 window. Alternatively, if you are modifying an existing custom resolution, you 

can click the 

Save

 button:

5. On the 

File

 menu, click 

Save

. Alternatively, click the Save button on the toolbar.

Changing Room Display Resolutions

To change the resolution for a display in a room:

1. Click the display you wish to configure.

2. Click the 

Resolution

 box in the 

Properties

 pane.

The resolution presets appears:

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments