manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 27 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 27

Verifying your System Configuration

19

6. If your system supports a GPI interface

1

, you can check the main system statuses of the Kaleido-X 

multi-viewer, to make sure that there are no errors or alerts related to:

– system  temperature
– power supply status
– fan operation
– card fault conditions

The other statuses—especially the ones listed in the table below—should all be normal, although if 
you left the door open when checking a GPI/Genlock card’s LEDs, you may see a warning under 

Chassis 

Door Open Status

.

1. The KXA-GPI-GEN card, with support for GPI, is standard on the Kaleido-X (7RU), and optional for the Kaleido-X (4RU). GPI 

support is built-in on the Kaleido-X16, and Kaleido-Modular multi-viewers.

KXA-GPI-GEN - 1.2V Status

KXA-GPI-GEN - 1.8V Status

KXA-GPI-GEN - 2.5V Status

Temperature

PSU statuses

Fan statuses

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments