Miranda Kaleido-X User Manual Download Page 177

Page: 177 / 407

Managing Display Libraries

169

Closing Display Libraries

To close a display library:

•

Once the custom library is saved, you can right-click in the library area, and then click

Close display

library

on the shortcut menu.

Alternatively, click

Close display library

, on the

File

menu:

Opening Display Libraries

To open a custom display library:

•

In the

Tools

pane, right-click anywhere in the display library area, and then click

Open display library

on the shortcut menu. Alternatively, click

Open display library

, on the

File

menu.

Note:

It is possible to have multiple custom libraries open at the same time.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X

Reviews:

Miranda Kaleido-X, User Manual, Page: 177 / 407

Search results

Summary of Contents for Kaleido-X

Reviews: