Miranda Kaleido-X, User Manual, Page: 391 / 407

Detailed Directions
383
Servicing
Generating a System Snapshot
To generate a system snapshot:
1. From a workstation on the same subnet, open a Web browser window and type the IP address of the
multi-viewer in the address bar.
1
2. In the Kaleido-X home page, click the XAdmin button.
The XAdmin Status and Options page appears.
Notes
• Miranda offers a more versatile bidirectional interface, the DXF-200 DVI/HDMI Optical Extension
System, which has superseded the DXF-100 interface. For more information on the DXF-200,
contact your Miranda sales representative.
• As of Kaleido-X version 4.10, the Monitor EDID Auto-detect feature is enabled by default in order
to facilitate the initial setup of a Kaleido-X system. To avoid problems, Miranda recommends that
you disable the auto-detect feature once the initial setup is completed. If you later wish to replace
one of the displays, re-enable the Auto-detect feature beforehand (remember to disable it once
the new display is up and running).
• Prior to Kaleido-X v. 3.00, EDID information was only reported for the master KXO-Dual card. In
more recent versions, every KXO-Dual/KXO-Dual3 card reports the EDID information for its
associated displays.
See also: • For more information on the DXF-100 interface, refer to the DXF-100 DVI Fiber Optic Interface
User’s Manual (part no. M792-9500-101).
1. The multi-viewer must have Kaleido-X software version 2.10 or later.