manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 279 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 279

Router Control Configurations

271

Translating Commands from External Router Controllers

1. A system controller—e.g. Miranda (NVISION) NV9000, Snell (Pro-Bel) Aurora, Nevion (Network 

Electronics) VikinX—sends a router command to an external router connected to the multi-viewer.

2. The Kaleido-X Software detects the command, translates it to the appropriate router protocol and, 

then sends it to the designated router over a serial or TCP/IP connection.

3. The router (or “Level” in a cascade) receives the command and executes a crosspoint switch, either 

changing the signal on one of its connections to a multi-viewer input, or…

4. …sending the signal to another device (e.g. vector scope, QC monitor, ISO recorder).

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments