manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 133 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 133

Detailed Directions

125

For Dolby E, if the AES pair is calibrated as a Dolby E source, then the 8 channels are available to be displayed 
by an audio monitor. The channel displayed by the audio monitor depends on how the monitor was 
configured.

For Dolby VANC, if the audio monitor is set to 

Auto

 or 

Dolby VANC

, the VANC metadata from the video of 

the assigned AES will be decoded. The audio monitor will have access to all amended audio peaks 
depending on VANC program configuration (regardless of which AES pair was assigned to the logical 
source).

Detailed Directions

Configuring Video/Audio Alarm Threshold

To configure the threshold for a video or audio alarm:

1. Connect to the multi-viewer you wish to configure, if you wish to apply the changes in real time (see 

“Connecting to a Multi-Viewer” on page 70).

2. In the main window, click the 

System

 tab, and then click 

Description/Calibrations

 on the second-

level tab bar.

3. Navigate to the alarm whose threshold you wish to calibrate, by expanding the appropriate multi-

viewer input, one of its Video elements, and then the alarm-related elements (or the ABT element, and 
then one of the ABT’s audio elements).

Note: 

If this step is omitted, then you will need to export the database to apply the calibration changes.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments