Miranda Kaleido-X, User Manual, Page: 138 / 407

130
Configuring Alarms
6
2. Click Add .
The alarm provider is added to the list.
To remove an alarm provider:
• In the Providers list box, select the provider you wish to remove and then click Remove .
The alarm provider is removed from the list.
Enabling Alarm Logging
As part of the alarm calibration process, you can specify that an alarm, when triggered, be logged to an
iControl application server that has a GSM log plug-in configured for this multi-viewer.
To choose the alarms that will be logged to the GSM configured for this system:
1. In the main window, click the System tab, and then click Description/Calibrations on the second-
level tab bar.
A hierarchical list representing the current system appears.
2. Expand the multi-viewer whose alarms you wish to log, navigate to the appropriate alarm, and then
click the alarm to select it.
Note: By default, native alarms are not logged, but virtual alarms and global alarms are always logged.
In addition, when a virtual alarm status changes, then the native sub-alarms that triggered the change
are logged even if logging is disabled for these native alarms. It is possible, however, to disable alarm
logging for a virtual alarm or for a global alarm, by editing the corresponding plug-in from the iControl
application server’s GSM alarm browser. Refer to the iControl User Guide, for more information.