manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 320 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 320

312

Tally Interface Devices

13

Device identifier input window

3. Type the name of the peripheral device in the 

Enter device identifier

 box, and click 

OK

.

4. Click the 

Interconnects

 tab.

5. Click the multi-viewer icon and hold the mouse button, while dragging the pointer towards the 

peripheral device icon.

A line representing the connection between the multi-viewer and the device appears.

Connection between the multi-viewer and the device (example using Kalypso, same for all devices)

6. Click the connection line between the multi-viewer and the device.

7. In the 

Properties

 pane, click the appropriate 

Output

 in the 

RS-422 Com Port

 list.

RS-422 Com Port output assignment (example using Kalypso, same for all devices except External Router)

8. Click the peripheral device icon in the 

Interconnects

 tab.

9. In the 

Properties

 pane, set the serial communications properties for the device.

10. On the 

File

 menu, click 

Save

. Alternatively, click the Save button on the toolbar.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments