manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 302 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 302

294

Routers & Kaleido-X

12

4. In the 

Properties

 tab, click the 

RS-422 Com Port

 box, and then choose a multi-viewer output from 

the list:

5. In the 

Interconnects

 tab, click the router controller icon. Under the 

Properties

 tab, a list of settings 

appears, with default values for the serial communication parameters: the bit rate (bps), the number 
of data bits, parity, stop bits and flow control. Select a logical router (e.g. SmallLogicalRouter) from the 

Router

 list:

Note: 

Simple router controllers can also communicate with Kaleido-X via TCP/IP. This type of connection 

is enabled automatically, and allows such controllers to issue commands to the multi-viewer’s internal 
router module.

Click the line to configure the connection properties

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments