Miranda Kaleido-X, User Manual, Page: 381 / 407

Detailed Directions
373
5. Type the key for the specific option in the box.
Once the option is enabled, the key is displayed, and a Disable button replaces the Enable button.
Configuring Power Supply Redundancy on a Kaleido-X16
Power supply redundancy is an option on the Kaleido-X16, which can ship with a single PSU. In order to
avoid having the system dashboard display unnecessary alarms, there is a check box in XAdmin to indicate
the presence of the second PSU. By default, this option is selected (both PSUs are monitored). Removing
the check mark will stop the monitoring of alarms for PSU B (its status is set to disabled, and therefore will
not appear on the dashboard).
Location of Slot A and Slot B in the front of the Kaleido-X16 frame
To configure the PSU B Installed option in XAdmin:
1. Open a Web browser window and type the IP address of the Kaleido-X16 frame in the address bar.
Example: To activate the Extraction of CC, Subtitling and XDS metadata option (CC/XDS Option) for a
Kaleido-X input card, you would need to locate the appropriate card in XAdmin’s Status and Options
page, and enter the key.
Notes
• One CC/XDS Option key is needed per input card, and the extraction of CC 608, CC 708, XDS and
Subtitling WST metadata are all activated as a single option.
• After enabling the 3D Support option in XAdmin, refresh the current layout or load another one,
for the change to be reflected on the monitor wall.
Slot A Slot B PSU A removed from Slot A