manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 196 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 196

188

Creating Layouts

9

Aspect ratio selection

The selected aspect ratio is applied to the video window, within the video monitor:

Video window’s aspect ratio changed to 4:3, within a 16:9 video monitor

To set a custom aspect ratio for a video monitor:

1. Click the video monitor for which a custom aspect ratio is needed.

2. In the 

Properties

 pane, click the 

Custom aspect ratio

 box.

The box becomes editable.

3. Type the appropriate aspect ratio, and then press Enter.

The new aspect ratio is applied to the video window, within the video monitor, and it is added to both 
the 

Current aspect ratio

, and 

Custom aspect ratio

 lists.

Note: 

Double-click the video, if is part of a composite monitor.

Note: 

The custom values are appended to the 

Custom aspect ratio

 list on an ongoing basis. They can 

then be applied to other monitors in other layouts. 

Current aspect ratio

 only lists the current custom 

ratio, if any, in addition to the default 16:9, and 4:3 values.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments