Miranda Kaleido-X User Manual Download Page 214

Page: 214 / 407

206

Creating Layouts

3. Choose an

Audio level

4. Choose a value from the

Channels

list to indicate which channel to display:

– If the

Audio format

is set to

PCM

, then the available choices are

left

right

and

stereo

– If the

Audio format

is set to

Auto

Dolby E

Dolby VANC

, then the available choices are

left, right,

stereo, surround, left surround, right surround, LFE, center, left back surround, right back surround, left
extra

and

right extra

5. Choose a

Dolby program

6. Specify a

Friendly name

Note:

If the actual audio source assigned to this audio monitor is not of the same format configured here,

then the audio data will not be shown.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X

Reviews:

Miranda Kaleido-X, User Manual, Page: 214 / 407

Search results

Summary of Contents for Kaleido-X

Reviews: