manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 251 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 251

Detailed Directions

243

9. Export the database to the Kaleido-X.

Creating a background action from the System list

1. Under the 

System

 tab (or any other tab that shows a filtered System list displaying alarms), right-click 

on a specific alarm:

2. From the 

Set action

 menu, select a trigger condition:

— on  Change
— on  Disabled
— on Normal/OK
— on Critical/Error

The 

Action Editor

 window appears.

3. From the 

Action list

 pane, click and drag one of the available action items to the middle column:

Note: 

The trigger conditions 

on Minor/Warning

 and 

on Major

 are supported for Gateway alarms only.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments