manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 365 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 365

Key Concepts

357

From Multi-Viewer to/from SNMP Devices

From Multi-Viewer to/from NTP Server

The following ports, used for communications to/from Network Time Protocol servers, are open by default 
on all Kaleido-X systems:

NVISION Ethernet protocol - 
Enterprise router

9193

TCP

VikinX Modular

4381

TCP

Quintech

9100

TCP

Sony HKSPC 

12345

TCP

GVGNP Emulator

Utah RCP-3

5001

TCP

SC-4 Ethernet

Snell (Pro-Bel) SW-P-02

2000

TCP

Snell (Pro-Bel) SW-P-08

14000

TCP

Note: 

This is configurable in XEdit—you can choose any UDP or TCP/IP port to use for communications 

between the multi-viewer and an external router.

Service

Port

Transport

Notes

SNMP

161

UDP

Simple Network Management Protocol, used for 
communications between multi-viewer and peripheral 
devices (e.g. sending get, get-next, and set commands to an 
SNMP agent, and receiving the response).

162

UDP

Simple Network Management Protocol, used for receiving 
traps (alerts) from peripheral devices.

Service

Port

Transport

Notes

NTP

123

TCP

Used for Network Time Protocol synchronization. Port needs to 
be open in both directions.

Driver

Port

Transport

Notes

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments