manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 19 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 19

Kaleido-X (7RU)

11

Kaleido-X (4RU) system overview

Kaleido-X (7RU)

The Kaleido-X (7RU) is a multi-room, multi-image display processor and router in a single, expandable 
chassis. Its unique mix of capabilities represents the most integrated monitoring and routing solution. As 
a multi-image processor, it offers the highest level of signal flexibility. Each chassis can display 96 HD, SD 
or Analog inputs any number of times, in any size, across 8 displays of any resolution and orientation. As a 
router, it offers switching of 96 unprocessed inputs to 48 HD/SD outputs for feeding monitors, test 
equipment and master control or production switchers.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments