manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 243 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 243

Managing Widget Libraries

235

6. Right-click anywhere inside the widget library, and then click 

Save widget library

 on the shortcut 

menu.

The 

Save Widget Library

 window appears:

7. Type a name for the new custom widget library, and then click 

Save

.

Closing a Widget Library

To close a widget library:

•

Once the custom library is saved, you can right-click in the library area, and then click 

Close widget 

library

 on the shortcut menu. Alternatively, on the 

File

 menu, click 

Close widget library

.

Opening a Widget Library

To open a custom library:

•

Right-click inside one of the predefined widget libraries in the 

Tools

 pane, and then click 

Open widget 

library

 on the shortcut menu.

•

On  the 

File

 menu, click 

Open widget library

.

•

On  the 

File

 menu, point to 

Open recent

, and then select from the list of recently used widget libraries.

Note: 

It is possible to have multiple custom libraries open at the same time.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments