Miranda Kaleido-X, User Manual, Page: 63 / 407

Using Timers
55
3. Use the Preset controls to set a new preset time:
4. Click the Reset button to reset the timer to its initial value (based on timer mode and preset time):
5. Click the Start button to start the timer:
Controlling a Timer by Using an External Numeric Keypad
If a timer is assigned to the current RCP user, or else if a timer is assigned by default for the room, then the
external keyboard’s numeric keypad controls this specific timer.
To configure your assigned timer, by using a numeric keypad:
• Press the slash key (“/”) to set the timer mode and end behavior. Keep pressing the key to cycle through
all the available options, until the buttons show the appropriate settings.
• Press the plus key (“+”) to reset the timer. (This will also stop the timer if it was running.)
Note: The reserved keys are always enabled, whether Num Lock is set or not.