manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 69 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 69

Changing the IP Address of a Multi-Viewer from the Monitor Wall

61

Specifying Output Resolution from the Monitor Wall

To specify output resolution from the Monitor Wall:

1. Right click on the Monitor Wall background, and choose 

Display Resolution

 from the menu that 

appears:

2. Choose a value from the 

Default DVI resolution

 menu:

3. Click 

OK

.

Changing the IP Address of a Multi-Viewer from the Monitor Wall

The IP address, system name, and other parameters can be set via a control panel on the monitor wall.

To change the IP address of the multi-viewer from the monitor wall:

1. Right-click anywhere on the monitor wall, point to 

Monitor Wall

, and then click 

System 

configuration

.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments