manualshive.com logo in svg

Miranda Kaleido-X, User Manual, Page: 46 / 407

Share
Download
Miranda Kaleido-X User Manual Download Page 46

38

Operation of the Monitor Wall

3

To hide all the dashboards:

•

Right-click anywhere on the monitor wall, point to 

Monitor Wall

 on the shortcut menu (if you clicked 

a layout element), and then click 

Hide all dashboards

 to hide the dashboard on every display in the 

room:

Loading Layouts

Loading a Layout by Using the Mouse

To load a layout on the monitor wall, by using the mouse:

1. Right-click the anywhere on the monitor wall, point to 

Monitor Wall

 (if you clicked a layout element), 

and then click 

Load layout

 on the shortcut menu:

Note: 

Clicking the 

×

 button closes the dashboards on every display monitor in the room if they were 

displayed automatically.

Note: 

When a dashboard is closed while the system is in an error condition, it will automatically reappear 

after 60 minutes, or when a new error occurs.

Hide dashboard

Hide all dashboards

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Reviews:

No comments