10) Install rectifier holder (1). Curl stator leads (2) as shown in fig-
ure.
CAUTION:
When installing rectifier, check to confirm that stator
leads have enough clearance with cooling fan
blades.
Tightening Torque
(a): 2.0 N
.
m (0.2 kg-m, 1.5 lb-ft)
11) Install brush holder cover to brush holder.
12) Place IC regulator (1) together with brush holder (2) horizon-
tally on rear end frame (3).
13) Install 5 screws.
Tightening Torque
(a): 2.0 N
.
m (0.2 kg-m, 1.5 lb-ft)
14) Install rear end cover (1).
Tightening Torque
(a): 3.7 N
.
m (0.37 kg-m, 3.0 lb-ft)
15) Install insulator (2) and tighten B terminal inner nut (3) to speci-
fied torque.
Tightening Torque
(b): 3.6 N
.
m (0.36 kg-m, 3.0 lb-ft)
16) Make sure that rotor turns smoothly.
CHARGING SYSTEM
6H-21
