7) After checking and adjusting valve lashes at valves (1) and (4),
rotate crankshaft pulley clockwise until lug “C” of signal rotor
aligned to CMP sensor and check the same valves at (3) and
(6). Adjust them as necessary.
8) After checking and adjusting valve lashes at valves (3) and (6),
rotate crankshaft pulley clockwise until lug “B” of signal rotor
aligned to CMP sensor and check the same valves at (2) and
(5). Adjust them as necessary.
A: Top dead center of No.1 piston
B: Top dead center of No.2 piston
C: Top dead center of No.3 piston
AIR CLEANER FILTER
REMOVAL AND INSTALLATION
1) Remove air cleaner case bracket bolts (1).
2) Remove air cleaner case clamps (2).
3) Remove air cleaner filter from case.
4) Check air cleaner filter for dirt.
5) If necessary, blow off dust by compressed air from air outlet side
of air cleaner filter.
If excessively dirty, replace filter.
6) Reverse removal procedure for installation.
ENGINE MECHANICAL (F8D ENGINE)
6A1-9
