MARUTI SUZUKI 800, Service Manual

Page: 129 / 644

3D
FRONT SUSPENSION 3D-1
SECTION 3D
FRONT SUSPENSION
NOTE:
All front suspension fasteners are an important attaching part in that it could affect the performance of
vital parts and systems, and/or could result in major repair expense. They must be replaced with one
of the same part number or with an equivalent part if replacement becomes necessary. Do not use a re-
placement part of lesser quality or substitute design. Torque values must be used as specified during
reassembly to assure proper retention of this part.
There is to be no welding as it may result in extensive damage and weakening of the metal.
Never attempt to heat, quench or straighten any front suspension part, or damage to the part may result.
CONTENTS
GENERAL DESCRIPTION 3D- 2 . . . . . . . . . . . . . . . .
DIAGNOSIS 3D- 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnosis Table 3D- 3 . . . . . . . . . . . . . . . . . . . . . .
Stabilizer Bar and/or Bushing Check 3D- 3 . . . .
Strut Assembly Check 3D- 3 . . . . . . . . . . . . . . . .
Suspension Control Arm and
Bushing Check 3D- 4 . . . . . . . . . . . . . . . . . . . . .
Suspension Control Arm Joint
Check 3D- 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel Disc, Nut and Bearing Check 3D- 4 . . . .
ON-VEHICLE SERVICE 3D- 5 . . . . . . . . . . . . . . . . . .
Strut Assembly 3D- 5 . . . . . . . . . . . . . . . . . . . . . .
Stabilizer Bar and/or Bushings 3D-10 . . . . . . . . .
Wheel Hub, Wheel Stud and
Wheel Bearing Outside Inner Race 3D-12 . . . .
Suspension Control Arm/Bushing 3D-15 . . . . . . .
Knuckle and Bearing 3D-18 . . . . . . . . . . . . . . . . .
REQUIRED SERVICE MATERIAL 3D- 21 . . . . . . . . .
SPECIAL TOOL 3D - 21 . . . . . . . . . . . . . . . . . . . . . . . .